XDS560V2 STM

XDS560V2 STM

The XDS560v2 STM JTAG Emulator is designed to be used with digital signal processors (DSPs) and microprocessors which operate from +1.2 to +4.1 volt levels on the JTAG interface. The power for the emulator comes from the provided supply. This means no power is drawn from the target system or host PC. The XDS560v2 STM is designed to be compatible with the existing Texas Instruments XDS560 emulator and operates with debuggers provided by Texas Instruments. XDS560v2 is the latest variant of the XDS560 family of high-performance debug probes (emulators) for TI processors. With the fastest speeds and most features of the entire XDS family, XDS560v2 is the most comprehensive solution to debug TI microcontrollers, processors and wireless connectivity microcontrollers.

The XDS560v2 is the first of the XDS560 family of debug probes to provide System Trace (STM) capability, a type of Trace that monitors the entire device by capturing system events such as the state of processing cores, internal buses and peripherals. Most XDS560v2 models feature also System Pin Trace, a mode where the System Trace data is sent to an external memory buffer (128MB) inside the XDS560v2 to allow capturing larger number of system events. The System Pin Trace data connection requires additional wiring to the JTAG connector. The Spectrum Digital XDS560v2 System Trace connects to the target board via a MIPI HSPT 60-pin connector (with multiple adapters for TI 14-pin, TI 20-pin, ARM 20 pin and TI 60-pin) and to the host PC via either USB2.0 High speed (480Mbps) or Ethernet 10/100Mbps.

• Supports Texas Instrument’s Digital Signal Processors and Microcontrollers with JTAG interface (IEEE 1149.1)
• Modular tail connector for alternate JTAG headers.
• Advanced emulation controller provides high performance.
• MIPI System Trace capability for advanced development.
•
• Ethernet communications to host PC.
• USB 2.0 communications to host PC.
• Supports +1.2 volt to +4.1 volt JTAG interfaces.
• 1 power LED
• 6 LEDs for operational status.
• 2 LEDs for ethernet status.
• User accessible RESET switch
• Power provided by +5 volt supplied power supply
• Compatible with Texas Instruments Code Composer Studio, DSP BIOS, and RTDX