XDS200

XDS200

The Spectrum Digital XDS200 is the first model of the XDS200 family of debug probes (emulators) for TI processors. The XDS200 family features a balance of low cost with good performance between the super low cost XDS100 and the high performance XDS560v2. Also, all XDS debug probes support Core and System Trace in all ARM and DSP processors that feature an Embedded Trace Buffer (ETB).

The Spectrum Digital XDS200 connects to the target board via a TI 20-pin connector (with multiple adapters for TI 14-pin, ARM 10-pin and ARM 20-pin) and to the host PC via USB2.0 High Speed (480Mbps).

The Spectrum Digital XDS200 comes in a package consisting of:

• XDS200 debug pod
• TI 20-pin to TI 14-pin converter adapter
• TI 20-pin to ARM 20-pin converter adapter
• TI 20-pin to ARM 10-pin converter adapter
• USB2.0 cable
• Quick start guide

Following the trend for space reduction on modern TI development boards, all XDS200 variants feature a standard TI 20-pin connector as the primary JTAG connectivity to the target. In addition to that, all variants also feature modular target configuration adapters for TI and ARM standard JTAG headers (the offer of adapters varies per model).

The XDS200 supports the traditional IEEE1149.1 (JTAG), IEEE1149.7 (cJTAG) as well as ARM’s Serial Wire Debug (SWD) and Serial Wire Output (SWO) and operates with interface levels from +1.5V to 4.1V.

All XDS200 models support a USB2.0 High Speed (480Mbps) connection to the host, with some models also supporting Ethernet 10/100Mbps. Also, some models support power consumption monitoring on the target board.

The XDS200 family is fully compatible with TI’s Code Composer Studio IDE. This combination gives a complete hardware development environment which includes an Integrated Debug Environment, Compiler, and full hardware debugging and Trace capability on selected TI microcontrollers, processors and wireless connectivity microcontrollers.

• Supports TI Processors with CJTAG/JTAG Interface
• USB 2.0 interface to host, no adapter card required
• CTI20 tail connector with 3 JTAG adapters (CTI20-TI14, CTI20-ARM20, CTI20-ARM10)
• Advanced emulation controller for high performance
• Supports Embedded Trace (ECB on selected TI devices)
• Supports +1.5 volt to +5 volt JTAG interfaces
• 2 status LEDs
• RoHS compliant
• Power provided by host USB port
• Compatible with TI Code Composer Studio 5.2 or later
• Compatible with SYS/BIOS
• Support UniFlash programming utility from TI
• Supports CCS DSS Java scripting
• Compatible with Windows 2000, XP, Vista, Win 7, and Linux (CCS 5.x) Operating Systems