Our office # 479, 6th Main, HMT Layout, R.T.Nagar, Opp to BMTC Depot, Bangalore-560 032
XDS560V2 STM Traveler
XDS560V2 STM Traveler
The XDS560v2 STM Traveler JTAG Emulator is designed to be used with digital signal processors (DSPs) and microprocessors which operate from +1.2 to +4.1 volt levels on the JTAG interface. The power for the emulator comes from the USB interface on a PC/laptop/USB hub. This means no power is drawn from the target system or host PC. The XDS560v2 STM Traveler is designed to be compatible with the existing Texas Instruments XDS560 emulator and operates with debuggers provided by Texas Instruments. The XDS560v2 System Trace unit is fully compatible with TI’s Code Composer Studio IDE. This combination gives a complete hardware development environment which includes an Integrated Debug Environment, Compiler, and full hardware debugging and Trace capability (on selected devices) of TI processors.
The XDS560v2 is the first of the XDS560 family of debug probes to provide System Trace (STM) capability, a type of Trace that monitors the entire device by capturing system events such as the state of processing cores, internal buses and peripherals. Most XDS560v2 models feature also System Pin Trace, a mode where the System Trace data is sent to an external memory buffer (128MB) inside the XDS560v2 to allow capturing larger number of system events. The System Pin Trace data connection requires additional wiring to the JTAG connector. The Spectrum Digital XDS560v2 System Trace connects to the target board via a MIPI HSPT 60-pin connector (with multiple adapters for TI 14-pin, TI 20-pin, ARM 20 pin and TI 60-pin) and to the host PC via USB2.0 High speed (480Mbps).
Supports Texas Instrument’s Digital Signal Processors with JTAG interface (IEEE 1149.1)
Advanced emulation controller provides high performance.
MIPI System Trace capability for advanced development.
USB 2.0 communications to host PC.
Supports +1.2 volt to +4.1 volt JTAG interfaces.
1 power LED
6 LEDs for operational status.
User accessible RESET switch
Power provided by USB cable, No Power supply required
Compatible with Texas Instruments Code Composer Studio and DSP BIOS
Compatible with XP/Vista/Win 7/Linux Operating System