1 2
DevKit3250
Evaluation Kit

- NXP LPC3250 Processor based on 266MHz ARM9EJ-S core -
Onboard 64MByte SDRAM + 128MByte NAND Flash + 4MByte Nor Flash

devkit3250
- 8 UARTs, IrDA, Ethernet, USB OTG, Audio, LCD, SD, 3 ADC, RTC, JTAG,...
- Ready-to-Run Linux2.6 OS



 
NXP LPC4357
Evaluation Board

The board is built around the NXP LPC4357 which delivers a versatile dual-core configuration using an ARM Cortex-M4 MCU with an ARM Cortex-M0 as a co-processor.

nxp_lpc4357
This is the first ARM Cortex board at this price point to deliver dual-core performance and media interface features including 1MB of dual-bank Flash, high speed USB host and device, an LCD interface, SD card and more.

 
Sabre Lite
Development Kit

ARM® Cortex A9 processor at 1GHz per core
- 1GByte of 64-bit wide DDR3 @ 532MHz - UART, USB, Ethernet, CAN, SATA, SD, JTAG, I2C…

sabrelite_2
- Three Display Ports (RGB, LVDS and HDMI 1.4a) and Two Camera Ports (1xParallel, 1x MIPI CSI-2)
- Analog (headphone/mic) and Digital (HDMI) audio
- Ready-to-Run Linux 3.0.15 and Android 4.0.4 OS
 
MARS BOARD

The MarS Board has 4GByte eMMC, 4*256MByte DDR3 SDRAM and 2MByte SPI Flash on board and features 4 USB Host and 1 USB OTG, 10M/100M/1Gbps Ethernet, TF card socket and three display ports on board (HDMI, RGB, LVDS).

mars_board
More other peripheral signals have been brought out from a pair of 2.54mm space 2*20-pin board-to-board female connectors such as UARTs, CAN, SPI, I2C, PWM, etc.
 
NXP LPC1768
ARM CORTEX M3 KIT

Low cost development kit for NXP LPC1768 (100MHz, the very fast Cortex-M3 processor), including the LPC1768 evaluation board(P768) and

NXP LPC1768
Emlink for ARM(EAH1)JTAG adapter easy to start , learn and test all the relevant applications and evaluate new project design.




 
XDS100v2 USB JTAG
 
Support for the following processor cores: TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM 9, ARM Cortex R4, ARM Cortex A8. SAM9260V1
14-pin TI JTAG connector Support for USB2.0 High Speed (480 Mbit/s) Support for Code Composer Studio v4 and newer . Compatible with Windows 2000, XP, and Vista.



 
cross works
for arm

CrossWorks for ARM is a complete C/C++ and assembly code development system for ARM7, ARM9, XScale, and Cortex microcontrollers.


crossworks_arm
And when we say complete we mean complete.




   
 
 
 
Clientele to list a few:
 
           
 
View more
 
     
All rights reserved. All other trademarks and copyrights are the property of their respective owners